Axel Oxygen 5 Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
MONO MODULE
ENG
Axel Technology srl www.axeltechnology.com MONO MODULE
29
JUMPER NAME
DESCRIPTION
J 1
PHANTOM
The phantom power (48V)
is applied to the
microphone-A input.
The factory default for this
jumper is ‘OFF’ (no jumper)
J 3
STUDIO
SPK MUTE
Studio speakers will be
muted when the ON-OFF
key is pressed
Studio speakers will be
muted when the fader is
opened (S)
J 4
C.ROOM
SPK MUTE
C. Room speakers will be
muted when the ON-OFF
key is pressed
C. Room speakers will be
muted when the fader is
opened (C)
J 5
TIMER 1
START
Timer 1 is activated when
the ON-OFF key is pressed
Timer 1 when the fader is
opened
J 6
RELAY 2
ACTIVATION
Relay 2 is activated when
the ON-OFF key is pressed
Relay 2 is activated when
the fader is opened (S)
J 7
RELAY 1
ACTIVATION
Relay 1 is activated when
the ON-OFF key is pressed
Relay 1 is activated when
the fader is opened (C)
J 8
DJ
CONSOLE
the channel is switched on
from the DJ CONSOLE
and/or from the local ON-
OFF key
the channel is switched on
when the fader is opened
(S) (C)
J 9
TALKBACK
TO C.ROOM
Pre-fader signal is made
available for TalkBack to
C. Room (S)
J10
TALKBACK
TO STUDIO
Pre-fader signal is made
available for TalkBack to
Studio (C)
(S) = indicates the default setting for MONO modules
linked to STUDIO microphones (See Chapter 11)
(C) = indicates the default setting for MONO modules
linked to C.ROOM microphones (See Chapter 11)
PCB version 5202
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

Comentarios a estos manuales

Sin comentarios