Axel AX3000 65 User's Manual - firmware 0632 Manual de usuario descargar pdf (Pagina 280)

Appendix

266 AX3000 - User's Manual

The main capabilities of the bootpd configuration file are as follows:

- tc: network description

- ht: network type

- sa: IP address of tftp host

- gw: optional router

- ha: Ethernet address of the AX3000

- ip: IP address of the AX3000 (this address is only used during the

downloading operation)

- bf: full firmware file name (path included)

Examples of bootp configuration files:

a) When the AX3000 and the tftp host are on the same network

net:hn:df=/etc/btdump:ht=ethernet:sa=192.168.1.252:to=auto:

axel1:tc=net:ht=ethernet:ha=00A034000001:ip=192.168.1.242:bf=/tmp/axel:

b) When the AX3000 accesses the tftp host via a router

net:hn:df=/etc/btdump:ht=ethernet:sa=192.1.1.243:to=auto:

net1:tc=net:sm=255.255.255.000:gw=192.168.1.252:

axel1:tc=net1:ht=ethernet:vm=rfc1048:ha=00A034000001:ip=192.168.1.242:bf=

/usr/axel/firm9645:

IMPORTANT: if a problem occurred during a previous download operation

(whatever method was used), the firmware of the target AX3000 may have

been erased. To restore valid firmware, the bootp+tftp protocol will

automatically be run when this target AX3000 is switched on.

a) Remote Administration

The remote administration command depends on the operating system. Refer

to the Chapter 5.5 (Unix/Linux), the Chapter 6.4 (OS/400) or the Chapter 7.3

(OS/390).

Example for Unix/Linux:

# rsh ax3001 ax_download password

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 297 298

Sin comentarios

Axel AX3000 65 User's Manual - firmware 0632 Manual de usuario Pagina 280