Axel Oxygen 3 Instrucciones de operaciones descargar pdf (Pagina 24)

Oxygen 7Oxygen 7 - MONO MODULE

Pag. 24

7.16 START button

The START button is used to start and stop a remote piece of equipment,

as well as working in conjunction with the fader open signal to allow output

from the channel.

Each press of the START button will alternately send Start and Stop

signals (See Remote Interface § 7.1). The LED illuminates accordingly.

Two Start operating mode are given:

When FADER ÙÙ START jumper is closed (see § 7.7 Module settings),

moving the fader away from the down position brings the module into the

ON (Start) status and a Start command is given (see Remote Interface).

Moving the fader back to its down position brings the module to OFF

status. This jumper does not affect START button operating.

When START ÙÙ FADER jumper is closed (see § 7.7 Module settings),

press START button to activate the module and provide a START

command. Press START again to de-activate the module. ON/OFF status

of the module is regardless of the Fader position.

When the START button is not activated, the channel fader can be

opened without bringing the audio up and without generating a start

command. The channel can now be activated, by pressing the START

button (ON and START red LEDs will glow).

7.17 ON LED

It will glow when the channel is in the ON / START status (ref to § 7.16).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 50 51

Sin comentarios

Axel Oxygen 3 Instrucciones de operaciones Pagina 24