Axel Oxygen 3 Instrucciones de operaciones descargar pdf (Pagina 38)

Oxygen 7Oxygen 7 - STEREO MODULE

Pag. 38

8.18 ON LED

It will glow when the channel is in the ON / START status (ref to § 7.16).

8.19 FADER

The fader is an ultra smooth 100 mm ALPS K-Series model controlling the

internal high quality VCA circuity.

There is no audio going through the faders which guarantees noise free

fading for ever! (see Chapter 6).

When the fader is closed, the signal is automatically muted, providing a

cut-off in excess of 100 dB. This high dB cut-off value ensures that the

main output is protected from crosstalk from announcers or fast spooling

tape decks.

The scale shows the attenuation. Normal operating position is at the ‘0’

mark, providing overall 0 dB of gain.

As described at the § 7.16, the fader may operate in tandem with the

START switch.

Three operating modes are given:

fader indipendent from the Start/Stop button. If the fader is down

(closed), the routing LEDs (MST, SUB1 and SUB2) glow at half

brightness and the routing circuitry can be regarded as being

armed. To activate the circuitry, the fader should be moved away

from the down position - the LEDs then glow with full power.

2) FADER ÙÙ START jumper is closed (see § 7.7 Module settings).

Moving the fader away from the down position brings the module

into the ON (Start) status and a Start command is given (see

Remote Interface). Moving the fader back to its down position

brings the module to OFF status and a Stop command is given.

This jumper however does not affect START button operating.

3) START ÙÙ FADER jumper is closed (see § 7.7 Module settings).

Moving the fader away from the down position does NOT bring the

module into the ON (Start) status. While the fader is already away

from the down position press START button to activate the module

and provide a START command. Press START again to de-

activate the module. ON/OFF status of the module is regardless of

the Fader position.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 50 51

Sin comentarios

Axel Oxygen 3 Instrucciones de operaciones Pagina 38