Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manual de usuario descargar pdf (Pagina 208)

Appendix

198 TCP/IP AX3000 User's Manual

tcp_router1_mask=255.255.255.0 (address IP format)

tcp_router2_ip=192.168.1.253 (address IP format)

tcp_router2_target=192.18.1.2 (address IP format | default)

tcp_router2_mask=255.255.255.0 (address IP format)

tcp_router3_ip=0.0.0.0 (address IP format)

tcp_router3_target=default (address IP format | default)

tcp_router3_mask=0.0.0.0 (address IP format)

#tcp_router4_ip= (address IP format)

#tcp_router4_target= (address IP format | default)

#tcp_router4_mask= (address IP format)

tcp_mss=512 (number, lower than 2049)

tcp_window=1000 (number, lower than 2049)

tcp_ttl=255 (number, lower than 256)

tcp_setport=fixed (fixed | random)

tcp_nagle=disable (disable | enable)

tcp_ping_setip=yes (yes | no)

Note: if a configuration file is obtained from an AX3000, undefined hosts and

routers are commented out.

Router explanation:

- The

tcp_router%_ip parameter is the router IP address, the

tcp_router%_target parameter is the target host (or network) IP

address and the

tcp_router%_mask parameter is an optional network

mask used to reach the target network.

- The default router is encoded by

tcp_router%_ip set to 0.0.0.0,

tcp_router%_target set to default and tcp_router%_mask set to

0.0.0.0.

AUX1 and AUX2 Parameters

In the following section of the file, for ease of reading the auxiliary port number

(1 or 2) has been represented by the '%' character. In a real configuration file,

the parameters for each auxiliary port would, of course, be listed.

aux%_service=none (none | rtty | printd | lpd

rcmd | rtelnet | tty | Prt5250)

aux%_service_name=aux1 (character string, 8 char max.)

aux%_service_num=2048 (number)

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 239 240

Sin comentarios

Axel AX3000 Platine Terminal Ethernet TCP/IP 65E Manual de usuario Pagina 208